VE.Direct communication port as standard

The Victron VE.Direct communication port allows the Victron Phoenix 48/1200 VE Direct Schuko – PIN482121200 48V Inverter to be connected to the Victron Phoenix 48/1200 VE Direct Schuko – PIN482121200:

• A computer (a VE.Direct to USB interface cable is required).
• Apple and Android smartphones, tablets, MacBook and other devices (a VE.Direct to Bluetooth Smart dongle is required).

The 48V Inverter Victron Phoenix 48/1200 VE Direct Schuko – PIN482121200 is fully configurable:

• Low battery voltage alarm and reconnection levels.
• Low battery voltage shutdown and restart levels.
• Dynamic disconnection: load-dependent disconnection level.
• Output voltage 210 – 245V
• Frequency 50 Hz or 60 Hz
• ECO mode on/off and ECO mode level sensor.

ECO mode operation

The 48V Victron Phoenix 48/1200 VE Direct Schuko Inverter – PIN482121200 will remain in stand-by when the wattage of its output drops below a pre-set value. Once in stand-by, the inverter will be activated briefly (adjustable; default: every 2.5 seconds). If the load exceeds the preset level, the inverter will remain on.

High additional peak starting power

One of the features of SinusMax technology is its very high starting power. Phoenix inverters are suitable for powering difficult loads, such as motors or power tools with a high starting peak.

Remote on/off switch

On this model of solar inverter, you can connect a remote On/Off switch and run the two wires to the inverter to remotely turn the inverter on and off. This option is one of the most valued by customers with a caravan or a boat or sailboat.

Datasheet 48V Inverter Victron Phoenix 48/1200 VE Direct Schuko – PIN482121200

View Victron Phoenix 48/1200 VE Direct Schuko 48V Inverter data sheet – PIN482121200